Removing Your Hardwood Floor

Important Things You Need To Know Before Removing Your Hardwood Floor

Hardwood flooring is a popular type of flooring in many homes for its durability and versatility. It can be installed in any room of the house and comes in many styles, colors, and finishes. If you’re thinking about removing your hardwood floors, here are steps on how to remove hardwood floor so properly without damaging the floors or home in Houston.

Let’s see the steps

1. Remove all Furniture, Carpets, and Rugs from the Room

Remove all furniture, carpets, and rugs from the room. The furniture and carpet will hold nails that may scratch the floor if they are not removed.

2. Prime Any Bare Spots on The Floor to Protect Them from Future Spills

Prime any bare spots on the floor with stain blocking primer to protect them from future spills. After removing the flooring, it’s possible that some underlying wood is still visible on the subfloor or joists. This can happen for various reasons such as previously unfinished subfloors or joists that were missed by a previous installer. In order to make sure these spots will be protected against stains caused by spills later, coating them with a stain blocking primer is the best solution.

3. Make Sure Your Tools are Sharp

Make sure your tools are sharp. A dull or improperly set blade will cause unnecessary damage to the floor and may even embed small pieces of wood into the subfloor. A properly sharpened blade is more efficient and effective, allowing you to remove the flooring faster and with greater precision.

4. Label the Pieces of Your Flooring before Removing Them

Label the pieces of your flooring before removing them, making it easier for you to replace later if you decide to finish the floor. This way you’ll be able to remember where each piece was removed from and how it fits into the overall design of the room. This will also allow you to get them back together easier if you want to finish the floor later on because all the pieces will be perfectly aligned.

5. Protect the Wall, Baseboard and Flooring Houston from Nicks with a Barrier Tape

Protect the wall, baseboard and flooring Houston from nicks with a barrier tape. To protect the newly exposed subfloor or joists as well as the wall and baseboard from nicks, purchase a quality masking tape or painter’s blue tape. This will also prevent any scratches to the newly exposed wood.

6. To Protect Furnishings Against Scratches

To protect furnishings against scratches, place flooring over a drop cloth or cardboard and then flip the flooring so that the scratched side is facing up. Once this is done, you may rip out the nails from those boards using a hammer and claw.

Conclusion

Removing a hardwood floor can be intimidating, but it doesn’t have to be. If you follow above 6 steps and use the right tools for the job, removing your wood floors will result in no damage whatsoever. Those are some of our expert tips on how to remove your hardwood flooring Houston without damaging them or other areas of your home.